
Suruga Take Sensuji Zaiku is a bamboo craft with more than 400 years of history. In 1976, it was designated a Traditional Craft of Japan by the national government.
Its roots lie in the soil and climate of Suruga (present-day central Shizuoka Prefecture), which are ideal for growing bamboo. It is said that the craft became famous through falconry, a favorite pastime of Tokugawa Ieyasu after he moved to Suruga, and that this spread word of its excellence. Here we introduce this remarkable handcraft and its appeal.
What is Suruga Take Sensuji Zaiku?
Its name comes from sensuji, “a thousand lines,” because it is said that a thousand fine, round bamboo rods could be lined up across the width of a tatami mat, about 90 cm (3 ft). The defining feature of Suruga bamboo craft is its round bamboo rods (maru-higo). It is said that the painstaking work of rounding each rod began out of consideration for the birds and insects kept in the cages, so that their wings would not be damaged.
Characteristics
A delicate craft made with round rods

Bamboo crafts from Kyoto and Beppu are well known, but most are made by weaving flat bamboo strips. Shizuoka's bamboo craft is entirely different: fine bamboo rods are inserted into holes drilled in a frame.
Baskets woven from green bamboo are made as everyday consumables. Suruga bamboo craft, by contrast, is a craft whose beauty deepens with age, letting you enjoy the character of the material.
Made from bamboo grown in Suruga and Shizuoka

Central Shizuoka has a mild climate and soil well suited to producing high-quality bamboo. Baskets and colanders have been excavated from the Toro archaeological site, showing that bamboo crafts were part of daily life here from very early times.
The reputation of Suruga bamboo craft spread around the Edo period. Since then, it has remained a family-run cottage industry: artisans grow and cut their own local bamboo and prepare the materials themselves. Instead of the imported bamboo that is widely available, the pieces are made from bamboo grown in Suruga. That is Suruga Take Sensuji Zaiku.
History
In the early Edo period, after Tokugawa Ieyasu retired as shogun and made Sunpu Castle his residence, scholars and merchants moved to the area, and the town of Suruga flourished.
Suruga bamboo craft became widely known when Ieyasu had his falconers make feed baskets for his beloved falconry. Around the same time, the bamboo pillow that the priest Tenkai napped on during a cherry blossom viewing at Edo Castle is said to have become popular among samurai traveling the Tokaido road.

Statue of Tokugawa Ieyasu, Sunpu Castle Park
The fame of Suruga bamboo craft spread so widely that a popular saying of the time played on the place name “Suruga” to praise it. It was passed down as a side job for samurai skilled with small knives, who made woven hats, basket curtains, and insect cages.
The delicate technique of using round rods that continues today is said to have been introduced by Sugawara Ichiga, a retainer of the Okazaki domain who excelled in flower arranging, the tea ceremony, and weaving.
Later, at the 1873 Vienna World's Fair, it was exhibited as a Japanese specialty and was well received. From the Meiji to the Taisho era it was exported widely to Europe, and after World War II to the United States.

From Dai Nippon Bussan Zue, collection of the National Diet Library
The process
Much as in the past, this cottage industry has artisans handling every step from raw material to finished product.
Preparing the material
Cutting the bamboo: Suruga Take Sensuji Zaiku mainly uses madake, hachiku, and moso bamboo that has grown for three to four years. The bamboo is cut once a year, in winter, when it contains the least moisture. It is then cut to set lengths and the nodes are shaved off in preparation for boiling.
Removing the oil: Fresh bamboo contains moisture and oil and will rot if left as is, so the oil is removed within a week. The bamboo is boiled in a vat of hot water with caustic soda to remove dirt and resin from the surface. After boiling for about 15 minutes, it is dried in the sun on a breezy hilltop for about a month.
Drying: When the skin of the sun-dried bamboo turns a beautiful ivory color, it is dry. It is then carried to the workshop and left in the rafters for another one to two years until it is completely dry.
Making the round rods
Splitting, peeling, and setting the thickness: The outer skin is shaved with a small knife, and the bamboo is split lengthwise with a hatchet into strips about 1 cm wide. The soft inner part is cut away, leaving only the strong part. Using a tool called a sendai, the inside is shaved evenly to set the thickness.
Scoring and splitting by hand: Lines are scored so as not to damage the bamboo fibers, and then the bamboo is bent left and right by hand to split it all the way to the end. This unique technique is only possible with strong, flexible Japanese bamboo.
Tapering and drawing the rods: The tip is tapered in preparation for drawing, and the quality of this step determines the finish of the rods. The strips are then drawn through progressively smaller holes with cutting edges, from rough to medium to finishing, producing fine round rods with no corners.
Making the frame
The frame is made from bamboo that has been measured, cut to width and thickness, and had its nodes removed.
Marking: Thirteen to fifteen pieces are clamped together and marked efficiently with the guides needed for the work. Marking where the rods will be inserted is also an important step for a beautiful finish.
Bending into rings: The material is wrapped around a heated cylinder called a doran to shape it. It sets in a round shape as it cools; judging the heat and how long to wrap it depends on the artisan's experience.
Cutting and joining: Once the ring is formed, diagonal cuts are made at both ends to join them. Glue is applied, and the ends are clamped and left to dry. The finished ring is so seamless that you can hardly see the joint.
Drilling the frame: This step demands intense concentration. The size of each hole is adjusted millimeter by millimeter to match the thickness of the rod. The holes are not only evenly spaced but also drilled at subtly different angles to match the angle at which each rod will be inserted. This step greatly affects the assembly.
Finishing
Assembly and polishing: Each rod is inserted into its hole and the frame is fitted together. The rings are turned on a lathe and polished smooth so that there are no rough edges. The color and luster of the bamboo deepen with the years, so you can enjoy it for a long time.
Incense sachet holders made for Kohgen

We asked Miyabi Andon Seisakusho to make bamboo holders for displaying incense sachets. The rods of about 1 mm in diameter that form the holders are so even that it is hard to believe each one was shaved by hand. This is true craftsmanship.
The holders have a delicate, uniform beauty, yet they are firmly assembled and built to last. You will feel how sturdy they are as soon as you hold one.
The rings at the top, bottom, and middle are not cut from bamboo stems but made from material bent into rings, so there is no need to worry about the cracking that can occur as natural material dries. Each of these is also made by hand. If you look closely at the rings, you can see the bamboo fibers running horizontally, showing that the material was joined into a ring.


Each hole for the round rods is drilled to fit its rod before assembly, which adds to the strength of the piece. We asked for the ivory color of the bamboo after oil removal to be left as is, so that you can enjoy how it changes over time.
We hope you will enjoy these as a touch of interior decor that brings together the beauty of Suruga Take Sensuji Zaiku and the pleasure of fragrance.
Suruga Take Sensuji Zaiku sachet holder by Miyabi Andon Seisakusho × Kohgen incense sachet (gold brocade)
In cooperation with
Miyabi Andon Seisakusho: https://miyabiandon.com/

