Here is how to burn incense. There are three main forms: sticks, coils, and cones. Please always take care when handling fire.
The three forms of incense

Sticks: the most common form
Sticks offer the widest variety of fragrances of any form. You can also break a stick to adjust how long it burns.

Coils: for long-lasting fragrance
Coils let you enjoy fragrance for longer than any other form. They are also ideal for filling a large room with scent.

Cones: to spread fragrance quickly
Cones burn for about 10 minutes, so they are perfect when you want to fill a space with fragrance in a short time. They are also recommended for entryways and restrooms.
How to burn stick incense
What you need
Steps

1. Fill the incense burner with ash to about 70–80% of its depth
Put incense ash into the incense burner. If the ash in a burner you have been using has become packed down, stir it gently from the bottom with something like a pair of disposable chopsticks so that it takes in air, and remove any unburned pieces. Spread the ash evenly so that the surface is flat.

2. Light the tip of the incense and stand it upright
Stand the stick in the center of the incense burner, pushing it into the ash until it is stable and vertical. You can also break the stick and lay it flat on the ash to burn.
If you are using an incense plate: Place the incense holder in the center of the plate and stand the incense in it so that it is stable.

Caution
Do not stand the stick at an angle. If it leans too far, it may fall over or extend beyond the edge of the burner, causing ash to drop outside.
If you are using an incense plate: Make sure the incense does not extend beyond the edge of the plate.
Tips
- Stay nearby until the incense has burned out completely. Do not blow on the incense to put it out.
- Avoid burning one stick right after another. If embers remain in the ash, they can ignite the base of the next stick and cause it to fall over.
- Burn incense in a place that is out of drafts.
How to burn coil and cone incense
What you need
Steps for coils

1. Fill the incense burner with ash to about 70–80% of its depth
Put incense ash into the incense burner. If the ash has become packed down, stir it gently from the bottom with something like a pair of disposable chopsticks so that it takes in air, and remove any unburned pieces. Spread the ash evenly so that the surface is flat.

2. Light the tip of the coil and place it gently on the ash
Gently place the coil in the center of the incense burner. Be careful not to burn yourself on the flame.
If you are using an incense plate: Place the holder in the center of the plate and lay the coil on it horizontally.

Caution
If the coil touches the incense plate, the plate draws heat away from it and the incense may go out. To make sure it burns cleanly to the end, keep the coil from touching the plate.
Steps for cones

1. Fill the incense burner with ash to about 70–80% of its depth
Put incense ash into the incense burner. If the ash has become packed down, stir it gently from the bottom so that it takes in air, and remove any unburned pieces. Spread the ash evenly so that the surface is flat.

2. Light the tip of the cone and place it gently on the ash
Gently place the cone in the center of the incense burner. Be careful not to burn yourself on the flame.
If you are using an incense plate: Place the holder in the center of the plate and set the cone on it.

Caution
If you place a cone directly on an incense plate, the plate draws heat away from where they touch and the incense may go out. Please use the holder that comes with the incense.




